QOWED draws on your second PC. How you see that picture decides two settings: the monitor and the screen dimming. Get those right and everything else is taste.
Second monitor (One PC)
The second PC's screen sits next to your game screen and shows the overlay, usually as a radar or an ESP view. In the menu choose Overlay, Your setup, One PC. Screen dimming goes to 0.
If the whole screen turns black: screen dimming is up. Set it to 0. (A shared config used to carry a fuser's dimming along; that is fixed, but a config you loaded before may still have it.)
Fuser (Two PCs / fuser)
A fuser mixes the second PC's picture over the game picture and keys out black. In the menu choose Overlay, Your setup, Two PCs / fuser. Screen dimming goes to the maximum.
If you see the second PC's desktop through the game: screen dimming is too low. Set it to the maximum.
- Monitor: pick the output that goes to the fuser. Try each one until the overlay shows up on your capture.
- Resolution: QOWED draws at the resolution Windows gives that output. If the fuser screen shows the wrong size, set Windows' display resolution for it (Settings, Display) to match your game monitor, or create a custom resolution in the NVIDIA or AMD panel if it is missing.
Settings worth knowing (Overlay page)
- Menu size: makes the menu bigger or smaller. Use it if the menu is cut off.
- Menu key: Insert by default.
- Hide from screen capture: recordings and screen shares see the picture without the overlay.
- Wait for the screen refresh: off gives more frames per second and a little tearing. Turn it off if the ESP feels laggy.
- Frame counter: hides the QOWED.VIP | FRAMES box in the top left.
- Crosshair: off, dot or cross, with size and opacity.